We are shocked! In photos – Mercedes G 63 AMG with wheel 6 x 6. Before us – the factory pre-production car made directly by employees of Mercedes-Benz. If incredible pickup like the potential buyers, the car put on the conveyor.
The basis of this monster – triaxial chassis Rover Mercedes G 320 CDI. These are the army vehicles, for example, in the Australian Army in 2011. But the body is, of course, the original, with a double cabin and cargo compartment, trimmed with bamboo trees. The length of this modification – 5875 mm, width 2110, height 2280 mm, respectively. Instead of the traditional beam axle engineers have installed portal, increasing clearance from 210 to 460 mm. And lock differenitsalov here already five – the three from the usual Gelendvagen plus another interaxial between second and third bridges and cross-axle third axis.
Instead of 185 hp 3.0 turbo diesel from a donor set here the mighty 544-hp V8 5.5 with two turbochargers. Five-step “automatic” NAG1 also gave way to a modern automatic transmission AMG Speedshift Plus 7G-Tronic seven-bands. Permanent all-wheel drive distributes traction between the axles in the ratio of 30/40/30, and all locks can be used on the move, regardless of the mode the transfer case. Also on the move, and the system is able to operate adjust the tire pressure. For example, to raise the pressure from 0.5 to 1.8 bar, it takes 20 seconds.
The car has a curb weight of 3850 kg, but can race at a speed of 160 km / h
And at this point in a four-room cabin riders enjoy the standard Mercedes-Benz G 63 AMG. Here customers will and genuine leather on the center panel and seats equipped with ventilation, and a multimedia center with navigation and a luxury sound system. If the project given the green light, the first production Mercedes G 63 AMG 6 x 6 may appear in October 2013. Estimated price – 350,000 euros.
Some video
No comments:
Post a Comment